Garage floors
Decorative flake and solid-color coating options for residential garages.
Concrete coatings built for the coast
Tell us about your garage, lanai or workshop and we’ll take care of the rest, from the first look to the finished job.
More than a coat of paint
Between salt air off the Halifax River, year-round humidity and sand tracked in from the beach, bare Port Orange concrete takes a beating. A quality coating can seal the slab, brighten the room and make everyday messes easier to manage. The right system depends on the slab, its moisture exposure and how the space gets used.
Core project types
We offer all three core project types across the service area, and every project starts with a free written estimate. Images are illustrative finish examples.
Decorative flake and solid-color coating options for residential garages.
Coating options for covered outdoor concrete, subject to site conditions.
Practical coating systems for home workshops and utility spaces — including hangar-adjacent workshops at the Spruce Creek Fly-In.
A careful process
Choose the project type and share the ZIP code, size and current floor condition.
Yes — we offer every core service listed on this site.
We can assess cracks, prior coatings, moisture exposure and access.
Confirm prep, materials, finish, cure time and price directly with us.
Services
Keeping the menu focused means every project is work we already perform.
What we cover
Residential attached and detached garages.
Covered residential outdoor concrete.
Residential work and utility areas.
We serve homeowners across the area and offer all three core services: residential garage floors, covered patios or lanais, and residential workshops. Metallic effects, unusual substrates, major concrete repair and commercial work are not advertised or promised.
Know your space?
Share the project type and the basics. We’ll use that scope to make sure your project is one we handle.
How it works
We serve local homeowners — free estimates, clear written pricing, and no pressure to proceed. We inspect the slab, recommend the system and stand behind the work.
Four steps
Select a garage, covered patio or lanai, or residential workshop. Include approximate size, condition and your ZIP code.
Every request is reviewed first — we confirm your project matches a service we offer and an area we serve.
We can assess cracks, moisture, old coatings, access and preparation needs. Site conditions determine what system is appropriate.
Confirm scope, materials, finish, cure time, warranty terms and price directly with us. There is no obligation to proceed.
Before saying yes
Ask how the slab will be prepared, whether moisture testing is appropriate — a real question on coastal slabs near the Halifax River — what is included around edges and transitions, when the surface can be walked or driven on, and what the written warranty covers.
For outdoor spaces, also discuss sun exposure, standing water after summer storms, texture and slip resistance. Recommendations should be tied to your actual slab—not just a finish photo.
See all FAQsFrequently asked questions
Understand what coastal Florida does to concrete and what to confirm before a coating project begins.
The essentials
We do — from estimate to finished project. Every job comes with a written scope, price and warranty terms.
For a typical two-car garage (about 400–500 sq ft), professionally installed flake epoxy in Florida generally runs about $1,600–$3,500, polyaspartic systems about $2,400–$4,500, and premium metallic finishes $3,200 and up. Per square foot, installed systems range roughly $3–$12 depending on the coating type, slab condition and prep work. Our written quote after a site review is the only firm number — moisture testing or mitigation, if your slab needs it, adds to the total.
Both are legitimate systems, and the right pick depends on your slab and schedule. Polyaspartic coatings cure much faster — often walkable the same day and drivable within about 24 hours — and are more UV-stable, which matters in Florida sun. Epoxy systems typically cost less per square foot and give the installer a longer working window, but standard epoxy can yellow with UV exposure and needs a UV-stable topcoat where sun reaches the floor. Ask us which system we recommend for your slab and why.
Yes — it is one of the biggest factors in Volusia County. A high water table and humid air push moisture vapor up through concrete, and a coating applied over a wet slab can blister or peel. That is why we moisture-test the slab before recommending a system, and why moisture mitigation is sometimes part of the quote. Skipping the test to save money is how Florida coatings fail early.
Professional systems are selected with this in mind. “Hot-tire pickup” — where tires heated on summer pavement bond to a coating and lift it — is a known Florida failure mode for cheap DIY kits. Pro-grade resins, proper diamond-grind prep, a UV-stable topcoat and following our cure schedule before parking on the floor are what prevent it. Ask what the written warranty covers.
We serve homeowners across the area and offer all three core project types: residential garage floors, covered patios or lanais, and residential workshops. We will not advertise or route work outside that confirmed scope.
The standard form covers residential garages, covered patios and lanais, and residential workshops or utility spaces in Port Orange (ZIP codes 32127, 32128 and 32129) and nearby coastal communities. It does not promise major structural concrete repair, unusual substrates, commercial facilities or specialty artistic finishes.
It depends on the system. Polyaspartic floors are often walkable within hours and ready for vehicles in about a day; traditional epoxy usually needs several days before cars return. Temperature and humidity affect curing, so get our walk-on, move-back and drive-on timing in writing.
No. Requesting an estimate is free and does not obligate you to accept a quote or begin work.
Ready for the next step?
A focused request helps us confirm the work is in scope before we schedule.
Free estimate request
Choose one of the three core project types below. Requests outside this confirmed scope are not accepted through the standard form.
Start with the space you have
Port Orange Epoxy Floors provides fast, free estimates and quality workmanship. Your details will open in your email app so you can review them. We serve homeowners across the area and offer all three core services.
Privacy Policy
What we collect when you request an estimate, how we use it, and the only party we share it with.
Port Orange Epoxy Floors is a lead-generation and referral website. We connect homeowners in the Port Orange, Florida area with independent concrete-coating contractors. We are not a contractor and do not perform coating work.
When you request a quote or contact us, we collect:
We share your quote-request information only with the contractor partner fulfilling your request, so they can contact you about your project. We do not sell your personal information. We do not share it with advertisers, data brokers, or any other third party except as required by law.
This site does not use advertising or cross-site tracking cookies. If analytics or preference cookies are added in the future, this policy will be updated with a new effective date. You can disable cookies in your browser settings; the site will still work.
Florida residents may request to know what personal information we hold about them, ask us to correct or delete it, and opt out of any sale or sharing of personal data — we do not sell data. To make a request, email info@portorangeepoxyfloors.com. We will respond within a reasonable time.
We use reasonable safeguards to protect your information, but no method of internet transmission is completely secure.
We may update this policy as the business grows. Material changes will be posted on this page with a new effective date.
Questions about this policy: info@portorangeepoxyfloors.com
See also our Terms of Service.
Terms of Service
What this referral service is, what it is not, and the terms that apply when you request an estimate through it.
This site is a marketing and lead-generation service that connects visitors with independent concrete-coating contractors. We do not perform epoxy or coating work, employ the contractors, or control how they perform their services. Any agreement for work is solely between you and the contractor.
Pricing ranges, project galleries, and FAQ answers on this site are general information only — not binding quotes. Final pricing, scheduling, warranties, and scope are set by the contractor you choose, in a written agreement with them.
We do not guarantee the quality, timeliness, or outcome of any contractor's work. Check the contractor's licensing, insurance, references, and reviews before hiring, and get all terms in writing.
All reviews and testimonials on this site are from real customers of the contractor or the service described. We do not publish fabricated reviews.
By submitting a quote request, you confirm that your information is accurate and that you are authorized to request work on the property described.
To the fullest extent allowed by law, Port Orange Epoxy Floors is not liable for any damages arising from your use of this site or from any work performed by an independent contractor you found through this site.
We may update these terms at any time; continued use of the site means you accept the current terms.
Questions about these terms: info@portorangeepoxyfloors.com
See also our Privacy Policy.